Your cart
Your cart is empty
Continue shopping
FG MR7 MONO
Sale price
$339.00 USD per wheel
Regular price
Regular price
$339.00 USD per wheel
Unit price
The field must not be blank
Increments of 1
Minimum of 1
Maximum of
FG MR7 MONO
Sale price
$339.00 USD per wheel
Regular price
Regular price
$339.00 USD per wheel
Unit price
A new way to view wheels
VR functionality is only supported on iOS
Description
The Makstton FG MR7 MONO is a 19-inch die-forged wheel defined by seven sculpted spokes, a wide lip and Dragon Whisker detailing. This model has undergone wheel bench testing and has a corresponding test report. It is offered in a standardized range, with Gloss Bronze, Gloss Silver, Gloss White and Custom finish options. Its 6061 aluminum center cap can be color-matched to the vehicle. Check the listed size, offset, bolt pattern and center bore, and confirm the exact fitment and available custom options with Makstton before ordering.
Wheel Install Guide
Installation & Safety
Professional installation is required. Before mounting the tires, inspect the wheels and confirm the size, offset, bolt pattern, center bore, brake clearance, and overall vehicle compatibility.
Always perform a bare-wheel test fit first. Ensure the wheel sits fully against the hub and does not contact the brakes, suspension, steering components, or bodywork.
Use the correct hub-centric rings and fasteners where required. Final tightening must be completed with a calibrated torque wrench according to the vehicle manufacturer’s specifications.
Recheck the wheel-bolt or lug-nut torque after 80–160 km (50–100 miles). Stop installation or use immediately if interference, vibration, damage, or any other abnormal condition is found.
Have a question?
Wheel Data
| Size | Color | ET | PCD | CB | Drill | Weight | Load | X Dist. | Tire Mounting | Socket |
|---|---|---|---|---|---|---|---|---|---|---|
| 19x8.5J | Custom | 35 | 5*114.3 | 73.1 | Ø15*Ø32*60° | 11.8kg- | 850kg | 30.5mm | Front Mounting | 17/19/21HEX |
| 19x8.5J | Gloss Silver | 35 | 5*114.3 | 73.1 | Ø15*Ø32*60° | 11.8kg- | 850kg | 30.5mm | Front Mounting | 17/19/21HEX |
| 19x8.5J | Gloss Bronze | 35 | 5*114.3 | 73.1 | Ø15*Ø32*60° | 11.8kg- | 850kg | 30.5mm | Front Mounting | 17/19/21HEX |
| 19x8.5J | Custom | 28 | 5*120 | 73.1 | Ø15*Ø32*60° | 11.9kg- | 850kg | 33.4mm | Front Mounting | 17/19/21HEX |
| 19x8.5J | Gloss Silver | 28 | 5*120 | 73.1 | Ø15*Ø32*60° | 11.9kg- | 850kg | 33.4mm | Front Mounting | 17/19/21HEX |
| 19x8.5J | Gloss Bronze | 28 | 5*120 | 73.1 | Ø15*Ø32*60° | 11.9kg- | 850kg | 33.4mm | Front Mounting | 17/19/21HEX |
| 19x8.5J | Custom | 42 | 5*108 | 63.3 | Ø15*Ø32*60° | 11.4kg- | 850kg | 31.0mm | Front Mounting | 17/19/21HEX |
| 19x8.5J | Gloss Silver | 42 | 5*108 | 63.3 | Ø15*Ø32*60° | 11.4kg- | 850kg | 31.0mm | Front Mounting | 17/19/21HEX |
| 19x8.5J | Gloss White | 42 | 5*108 | 63.3 | Ø15*Ø32*60° | 11.4kg- | 850kg | 31.0mm | Front Mounting | 17/19/21HEX |
| 19x8.5J | Custom | 17-43 | 5*100-120 | 56.6-74.1 | Ø15*Ø32*60° | / | 850kg | / | Front Mounting | 17/19/21HEX |
| 19x9.0J | Custom | 23-40 | 5*100-120 | 56.6-74.1 | Ø15*Ø32*60° | / | 850kg | / | Front Mounting | 17/19/21HEX |
| 19x9.5J | Custom | 30-42 | 5*100-120 | 56.6-74.1 | Ø15*Ø32*60° | / | 850kg | / | Front Mounting | 17/19/21HEX |
Notes:
Specifications shown are subject to actual factory inventory.
Listed weights are based on the maximum offset (ET) and largest center bore. Actual weight may vary depending on center bore and offset. Production tolerances apply.
Use 60° conical-seat wheel bolts or lug nuts for installation. All MTW Wheel Union wheels use 60° conical bolt seats.
